Technical Specifications

"OPTIFLEX"-Polycoated winding wires with bright annealed round solid bare copper conductor for submersible Pump-Motors.

*Ref :IS 8783(Part 4/ Sec 3):1995

Conductor
 Diameter
(mm)
(Nom.)

Cross-
Sectional
Area
(mm2)
(Nom.)

Tolerance
 in
Cond.
Dia
(mm)
(+/-)

Elongation
At
Break
(%)
(Min)

Cond.
Resitance
At 20oC
(ohm/Km)
(Max.)

Insulation
Thickness
(mm)
(Min.)

Overall
Diameter
(mm)
(Max.)

0.40

0.126

0.004

24.00

140.00

0.20

0.90

0.50

0.196

0.005

25.00

89.60

0.20

1.00

0.60

0.283

0.006

26.00

62.20

0.20

1.10

0.70

0.385

0.007

28.00

45.70

0.20

1.20

0.80

0.502

0.008

28.00

35.00

0.20

1.30

0.90

0.636

0.009

29.00

27.60

0.20

1.40

1.00

0.785

0.010

30.00

22.40

0.20

1.50

1.10

0.950

0.011

31.00

18.50

0.20

1.60

1.20

1.130

0.012

32.00

15.50

0.20

1.70

1.30

1.327

0.013

32.00

13.20

0.20

1.80

1.40

1.539

0.014

32.00

11.40

0.25

2.00

1.50

1.766

0.015

32.00

9.95

0.25

2.10

1.60

2.010

0.016

32.00

8.75

0.25

2.20

1.70

2.269

0.017

32.00

7.75

0.25

2.30

Note:-
(1) The information and details provided here in are for general reference purpose only and should be taken as firm specification. Optiflex Industries shall not own the responsibility for any consequential damage incurred due to any action or decision based on above information and details

(2) The Copper wire sample taken from finished insulated winding wire shall exhibit 95% value of the elongation given above.

(3)Other than the above mentioned sizes can be supplied on request, as per your required specification.